240 Insulation Piercing Connector Cable Insulation Electrical Connectors Wire Connector Types

• Technics: Cutting
• Standard: Factory Size
• Usage: Line Fittings, Wire Connecting
• Type: Piercing Connector
• Single Gross Weight: 0.25kg
• Material: PA66
• Model NO.: SE240
• Surface Protection: Coated Tin Plating
• Application: Overhead Line Accessories
• Certificate: ISO9001/CE
• Screw Type: Hex Bolt M8
• Blade: Aluminum/Copper/Brass
• Piercing Depth: 2.5-3.5mm
• Main Line: 16-95mm2
• Branch Line: 4-35(50)mm2
• ODM/OEM: Offered
• Transport Package: Inner Box-Carton Box
• Specification: SE240
• Trademark: SOIEA
• Origin: China
• HS Code: 7616991090
• Production Capacity: 300000/Per Month

Product Description

Description

• Piercing connector, simple installation, need not strip the cable coat.
• Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.

• Self-seam frame, waterproof, wet proof, and anti-corrision, extend the using life of insulated lead and connector.
• Adopted special connecting tablet, apply to joint of Cu (Al) and Cu (Al) or Cu and Al.
• Small electric connecting resistance,connecting resistance less than 2.5 times of the resistance of branch.
• Special insulated case body, resistance to ilumination and environmental aging, the insulation strengthcan up to 12kv.
• Arc Surface design, apply to connection with the same (different) diameter, wide connection scope(0.75mm2-400mm2/ td)
 

Features

Made of hard, corrosion resistant aluminum alloy
Tested according to international and many national standards
Teeth either of pure aluminum or tin-plated aluminum

Construction
Component:Material
Body:Tin coated corrosion resistant aluminum alloy
Washer:Conical spring washer
Screw:Hot dip galvanized
Cover:Weather and UV-radiation resistant plastic
Installation:Remove conductor inlet caps according to the connection to be made. Open the upper lid.Unscrew the screw until the conductors can be placed into the connector. Tighten the screw until the shearhead breaks. Shut the upper lid.  

 

Installation Insulation Piercing Connector

1.Adjust the connector nut tosuitable location.

2.Put the branch wire in to thecap sheath fully.

3.Insert the main wire if there are two laysof insulated lay in the main cable, shouldstrip a certain length of the first insulatedlay from inserted end.

4.Turn the nut by hand, and fix the connector in suitable location.
5.Screw the nut with the sleeve spanner.

6.Screw the nut continually until the top part is cracked and dropped down.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------